Circuit break

    Battery disconnection is divided into internal and external circuit. For internal break, you can use the way to find out the fault occurred in which grid. Lead a wire from the positive pole, one by one back to “test the fire”, the position of circuit break is here between “fire and no fire”, with a thick enough to cross the wire across the single cell, the vehicle can start.

    Battery pile head is broken

    When the pile of a battery from the plastic wood shell above the flat was cut (or lower than the plane of the plastic shell), the single grid can be used across the grid.  6 single cell 12V battery, for example, if the negative pole cut off, you can move the wire to the same single cell, the engine can still start after fastened it.    

    The case of lead acid battery was broken

    Due to the battery is not fixed and other reasons, the battery case may be broken. If found it in time, should first plugging. The battery back to the opposite side of the leak, dry the leakage of electrolyte, digging some bit in the battery cover. If it is a long strip of cracks, revamping process should be after hacksaw sawed the V groove. 

    No matter what kind of first aid method, only in the way of emergency use, when travel to the maintenance point or station, Fully repaired or replaced was required, no longer reluctant to use.